Flaming

A very sweet flame and molding job from the 70's by Bruce Parrish.

White Bear 120

This really cool photo was among the first batch of shots Joe Hurst sent me. It was taken at Bonneville on the way home from his cross country trip with Dick Allen in 1973, hence all the gear he's packing. Joe says once they were on the salt, they just "got it on". It was taken by Dick's female passenger. Dick had Sportster gauges (speedo and tach), on Loco-Motion and said it was pegged at 120 mph.

White Bear 120

This really cool photo was among the first batch of shots Joe Hurst sent me. It was taken at Bonneville on the way home from his cross country trip with Dick Allen in 1973, hence all the gear he's packing. Joe says once they were on the salt, they just "got it on". It was taken by Dick's female passenger. Dick had Sportster gauges (speedo and tach), on Loco-Motion and said it was pegged at 120 mph.

More Loco

Dick on a their (the South Bay group's), annual cross country trip. Probably about 1973. These were some of the first photos Joe Hurst sent me, but I never got around to posting them.

Here's a pretty good shot of Dick and his Knucklehead chopper Loco-Motion. For such a well known bike, there aren't many good photos of it.

I believe this one is in Iowa.

More Loco

Dick on a their (the South Bay group's), annual cross country trip. Probably about 1973. These were some of the first photos Joe Hurst sent me, but I never got around to posting them.

Here's a pretty good shot of Dick and his Knucklehead chopper Loco-Motion. For such a well known bike, there aren't many good photos of it.

I believe this one is in Iowa.

B.P. Chopper Sculpture

After seeing the post on Greg Parigian's chopper sculpture, Bruce Parrish sent me some pics of the one he did for his father. It was based on and done when he finished his first build back in 1971. Bruce says, "It's 9.5" long and about 4" high at the sissy bar tip... and, yes, those are nails as well as washers, nuts and bolts, plus a few welding rods".


Bruce added, "Maybe I should go back to this form of art. Things happen way quicker".

B.P. Chopper Sculpture

After seeing the post on Greg Parigian's chopper sculpture, Bruce Parrish sent me some pics of the one he did for his father. It was based on and done when he finished his first build back in 1971. Bruce says, "It's 9.5" long and about 4" high at the sissy bar tip... and, yes, those are nails as well as washers, nuts and bolts, plus a few welding rods".


Bruce added, "Maybe I should go back to this form of art. Things happen way quicker".

Dick Allen's Blue Print Part 2

These shots of the Blue Print are from an old Street Chopper and were found floating around the blogs awhile back. I Photoshoped the top one, it was taken by camera and had a flash reflection and was distorted. I had this issue (since lost), and am guessing it's from around 1974-75. Anybody know the month and year of the Street Chopper this is from?

Except for the paint and the bars, the bike is pretty much the same as first built. Note the raised transmission. I forgot to mention that feature of the frame in the first post. It looks like this was shot near the Del Amo financial center at Hawthorne and Carson Blvd. in the South Bay.


If you can get past the model, you'll notice some of the goodies of the bike. She helps illustrate just how low this bike sits. Note the seat. Dick liked to keep them real thin.


Sorry about the magazine gutter but it's not my scan.

I wonder what became of the bike or frame?

Dick Allen's Blue Print Part 2

These shots of the Blue Print are from an old Street Chopper and were found floating around the blogs awhile back. I Photoshoped the top one, it was taken by camera and had a flash reflection and was distorted. I had this issue (since lost), and am guessing it's from around 1974-75. Anybody know the month and year of the Street Chopper this is from?

Except for the paint and the bars, the bike is pretty much the same as first built. Note the raised transmission. I forgot to mention that feature of the frame in the first post. It looks like this was shot near the Del Amo financial center at Hawthorne and Carson Blvd. in the South Bay.


If you can get past the model, you'll notice some of the goodies of the bike. She helps illustrate just how low this bike sits. Note the seat. Dick liked to keep them real thin.


Sorry about the magazine gutter but it's not my scan.

I wonder what became of the bike or frame?

Dick Allen's Blue Print

Bruce Parrish sent me these photos of Dick Allen's Blue Print. It was called the Blue Print because it was blue, but more importantly, it was planned to be the first of a series of ground up choppers built using Dick's parts and established styling cues.

Here's Bruce prepping the ultra rare Dick Allen frame for paint circa 1973. Only a few were ever produced. Dick didn't create the frame jig. For now, Bruce doesn't remember the name of the guy who Dick got it from. This was at Bruce's paint shop adjacent to Dick's in Gardena, CA. Note the Parrish Arts Logo in the background and compare it to Dick's Logo (both designed by Bruce), shown below.

This appears to be a under construction shot. The rear fender looks to be painted at this stage. Later, as on many South Bay bikes, it's chrome. Note the use of a (then), late model oil tank. The Blue Print was built for Freaky Fred Williams.

Above and below. Two of Bruce's photos from either the Tridents or the Long Beach car show.


This bike conjures up some fuzzy memories. I seem to remember seeing a feature on it and possibly another very similar bike using one of Dick's frame in a one of my now lost Custom Chopper Magazines. I know it was later featured in Street Chopper with a lighter blue paint job. More on that to come.

Dick Allen's Blue Print

Bruce Parrish sent me these photos of Dick Allen's Blue Print. It was called the Blue Print because it was blue, but more importantly, it was planned to be the first of a series of ground up choppers built using Dick's parts and established styling cues.

Here's Bruce prepping the ultra rare Dick Allen frame for paint circa 1973. Only a few were ever produced. Dick didn't create the frame jig. For now, Bruce doesn't remember the name of the guy who Dick got it from. This was at Bruce's paint shop adjacent to Dick's in Gardena, CA. Note the Parrish Arts Logo in the background and compare it to Dick's Logo (both designed by Bruce), shown below.

This appears to be a under construction shot. The rear fender looks to be painted at this stage. Later, as on many South Bay bikes, it's chrome. Note the use of a (then), late model oil tank. The Blue Print was built for Freaky Fred Williams.

Above and below. Two of Bruce's photos from either the Tridents or the Long Beach car show.


This bike conjures up some fuzzy memories. I seem to remember seeing a feature on it and possibly another very similar bike using one of Dick's frame in a one of my now lost Custom Chopper Magazines. I know it was later featured in Street Chopper with a lighter blue paint job. More on that to come.

Mystery Bike Part 3, Bruce's 1st Build

Working from the first post backwards, here's photos of Bruce Parrish's first chopper. This is the same bike that would become the Funny Bike in it's second iteration.

Escape from New York. Bruce bought a complete 1950 Panhead late in 1970 for $100. The frame engine and trans were loaded in the trunk of his friend's Chevelle and they headed for California.


Once in Cali., Bruce stumbled upon Dick Allen's shop, where the bike above, became the inspiration for his build.


Bruce's first mold job.


The proud owner with his freshly finished creation circa 1971.


Nicely detailed motor. Until I asked about it, Bruce had forgot about the chromed barrels. Turn down tips were added to the drag pipes at this point. The hex end bolt forward and highway pegs were made to match the rocker stud bolts of the Dick Allen springer.


Back to New York. Bruce rode his Pan cross country a few times.


Another trip to the east coast in '72. This time with SU carb and 2 into 1 collector exhaust.


Happy Birthday! Bruce said he was never superstitious since his birthday was the 13th. Then, on 1/13/73 (his 23rd birthday), some dude in a Mustang gave him a nasty present. Some might say it's the Green Bike curse. This was the end of the bike as it was and the beginning of the Funny Bike.

Mystery Bike Part 3, Bruce's 1st Build

Working from the first post backwards, here's photos of Bruce Parrish's first chopper. This is the same bike that would become the Funny Bike in it's second iteration.

Escape from New York. Bruce bought a complete 1950 Panhead late in 1970 for $100. The frame engine and trans were loaded in the trunk of his friend's Chevelle and they headed for California.


Once in Cali., Bruce stumbled upon Dick Allen's shop, where the bike above, became the inspiration for his build.


Bruce's first mold job.


The proud owner with his freshly finished creation circa 1971.


Nicely detailed motor. Until I asked about it, Bruce had forgot about the chromed barrels. Turn down tips were added to the drag pipes at this point. The hex end bolt forward and highway pegs were made to match the rocker stud bolts of the Dick Allen springer.


Back to New York. Bruce rode his Pan cross country a few times.


Another trip to the east coast in '72. This time with SU carb and 2 into 1 collector exhaust.


Happy Birthday! Bruce said he was never superstitious since his birthday was the 13th. Then, on 1/13/73 (his 23rd birthday), some dude in a Mustang gave him a nasty present. Some might say it's the Green Bike curse. This was the end of the bike as it was and the beginning of the Funny Bike.

Ed Roth's Hustler Photos Uncut and Uncensored

Okay, I'm exaggerating a bit... nothing was censored, but these photos have never really been seen before.

Awhile back, In the midst of an unrelated email subject, Joe Hurst surprised me with Ed Roth's original photos for the Hustler feature in Choppers Magazine. As it turned out, Ed gave Joe the photos after it was in the magazine. The first two photos (below), were not published. I did a post on the Hustler feature last Dec. and although the last three made the magazine, I'm posting them again since they are much bigger, much better (than the bad print quality of the magazine), and uncropped.

Here's a cool one. It's an alternate to the shot Roth used to open the article. Yes the angle of the one used is better, but it has that big finger print on it. Like Roth said in the feature, "those forks really shine!"


Another photo that didn't make it.


The sissy bar in all it's glory. This one and the two below were featured, but the top of the sissy bar and the groovy trash can got cropped out.


Besides the details of the Phil Ross stitched seat, Jim Andrews bike "Grapes of Wrath" (upper left), is easier to spot in this large print.


The money shot, large and uncut. Joe later had the big SU carb polished to match the other shinny stuff. As mentioned in the first post, the engine came out of Dick Allen's Wheeler Dealer.

I think it's pretty cool to see these behind the scene shots all these year later.
Thanks Joe!

Ed Roth's Hustler Photos Uncut and Uncensored

Okay, I'm exaggerating a bit... nothing was censored, but these photos have never really been seen before.

Awhile back, In the midst of an unrelated email subject, Joe Hurst surprised me with Ed Roth's original photos for the Hustler feature in Choppers Magazine. As it turned out, Ed gave Joe the photos after it was in the magazine. The first two photos (below), were not published. I did a post on the Hustler feature last Dec. and although the last three made the magazine, I'm posting them again since they are much bigger, much better (than the bad print quality of the magazine), and uncropped.

Here's a cool one. It's an alternate to the shot Roth used to open the article. Yes the angle of the one used is better, but it has that big finger print on it. Like Roth said in the feature, "those forks really shine!"


Another photo that didn't make it.


The sissy bar in all it's glory. This one and the two below were featured, but the top of the sissy bar and the groovy trash can got cropped out.


Besides the details of the Phil Ross stitched seat, Jim Andrews bike "Grapes of Wrath" (upper left), is easier to spot in this large print.


The money shot, large and uncut. Joe later had the big SU carb polished to match the other shinny stuff. As mentioned in the first post, the engine came out of Dick Allen's Wheeler Dealer.

I think it's pretty cool to see these behind the scene shots all these year later.
Thanks Joe!